Jensen POWER 400 Operation Manual - Page 7
Ground Terminal GND, Replacement Fuse Requirements FUSE - 2 amp
 |
UPC - 796860142737
View all Jensen POWER 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Ground Terminal (GND) Make the ground lead as short as possible, leaving enough length to complete the installation and to allow for any service that may be needed at a later date. To ensure a good ground, scrape away any paint or undercoating to expose bare metal. Use a "ring" terminal of the proper gauge and an "outside star washer" (between the chassis and ring terminal) when making your ground connection. Although you've scraped away the paint to expose bare metal, the outside star washer will help to "bite into" the chassis for a tight, secure ground. POWER INPUT GND REM +12V Drill hole in chassis sheet metal. Replacement Fuse Requirements (FUSE) Model 400.2 760.4 900.1 Quantity 1 2 2 Amps 25 20 30 Type ATO ATO ATO 5 POWER Amplifiers
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
 |
 |
POWER Amplifiers
5
Ground Terminal (GND)
Make the ground lead as short as possible, leaving enough length to complete
the installation and to allow for any service that may be needed at a later date.
To ensure a good ground, scrape away any paint or undercoating to expose
bare metal. Use a "ring" terminal of the proper gauge and an "outside star
washer" (between the chassis and ring terminal) when making your ground
connection. Although you’ve scraped away the paint to expose bare metal, the
outside star washer will help to "bite into" the chassis for a tight, secure
ground.
Replacement Fuse Requirements (FUSE)
Model
Quantity
Amps
Type
400.2
1
25
ATO
760.4
2
20
ATO
900.1
2
30
ATO
Drill hole in chassis sheet metal.
POWER INPUT
GND
REM
+12V