Kenmore 28615 Owners Manual - Page 17

Alwaysfollowall safetyprecautionswhenperformingmaintenanceto the PowerMate, WARNING Electrical Shock Or Personal Injury Hazard Disconnect electrical supply before performing maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting. BELT CHANGING AND AGITATOR CLEANING TO REMOVE BELT TO CLEAN AGITATOR: 3. "Parn PowerMate right side up, Press handle release pedal and lower the swivel. Lift rear latches up. t. Turn PowerMate upside down. 2. Unscrew the two (2) PowerMate cover screws. Side Latch R ear Latches NOTE: In order to keep cleaning efficiency high and to prevent damage to your vacuum cleaner, theagitator must be cleaned every time the belt is changed. The agitator must also be cleaned according to the following schedule: Vacuum Cleaner Use Clean Agitator HEAVY (used daily) every week MODERATE (used 2-3 times/week) every month LIGHT (used 1 timetweek) every 2 months IMPORTANT 4goraTsop rethmeovseidecsovaenr,d pull out. Disconnect vacuum cleaner from electrical outlet. Check and remove hair, string and lint build-up frequently in the PowerMate agitator and end cap areas, Remove any dirt or debris in the belt path area or in the brush roller area, Carefully remove any string or debris located on the agitator or end caps, 5. Lift agitator assembly out and remove worn belt. / _ End Cap 6. Check and clean end cap areas. See AGITATOR ASSEMBLY for picture of complete agitator assembly. 17 AGITATOR ASSEMBLY End Cap Brush Unit End Cap _