Kenmore 3050 Use and Care Guide - Page 6
Product, Record, Plate Location, Grounding, Liquefied, Petroleum, Gas Conversion
View all Kenmore 3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Product Record In this space below, record the date of purchase, model and serial number of your product. You will find the model and serial number printed on the serial plate. This serial plate is located under the cooktop. See bottom of this page for the serial plate location. Model No. 790. Serial No. Date of purchase Save these instructions and your sales receipt for future reference. Serial Plate Location You will find the model and serial number printed on the serial plate. The serial plate is located under the cooktop. Please see the illustration for exact location. Remember to record the serial number for future reference (See Product Record above). Serial plate is located under the burner box. Grounding Instructions For personal safety, the cooktop must be properly grounded. For maximum safety, the power cord must be plugged into an electrical outlet that is correctly polarized and properly grounded. DO NOT Operate the cooktop using a 2-prong adapter or an extension cord. If a 2-prong wall receptacle is the only available outlet, it is the personal responsibility of the consumer to have it replaced with a properly grounded 3-prong wall receptacle installed by a qualified electrician. See the INSTALLATION INSTRUCTIONS packaged with this cooktop for complete installation and grounding instructions. Grounding type wall receptacl, pply cord with 3-prong grounding plug This appliance is equipped with a 3-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. DO NOT cut or remove the grounding prong from this plug. Avoid fire hazard or electrical shock. DO NOT use an adapter plug, an extension cord, or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death. Liquefied Petroleum (Propane) Gas Conversion This appliance can be used with Natural Gas or Propane (L.P.) Gas. It is shipped from the factory for use with Natural Gas. If you wish to covert the appliance to LP Gas, use the supplied LP Gas conversion kit and instructions, contained in an envelope marked FOR LP/PROPANE GAS CONVERSION. The conversion must be performed by a Sears or other qualified LP service dealer following the supplied instructions. To avoid serious injury or death, any additions, changes or conversions required for this appliance to operate with either LP or Natural Gas must be made bya Sears or other qualified LP service dealer.