Kenmore 32656 Owners Manual - Page 5

Materials and Basic Tools Needed Materials Needed _lb simplify the installation Sears has available the installation parts shown below. You may or may not need all of these materials, depending on your type of installation. WATER HEATER INSTALLA. TION KIT WITH FLEXIBLE CONNECTORS FOR 3/4" OR 1/2" THREADED OR COPPER PLUMBING EXPANSION TANKS FOR THERMAL EXPANSION CONDITIONS AVAILABLE IN 2 GALLON AND 5 GALLON CAPACITY THROUGH LOCAL SEARS STORE OR SERVICE CENTER DRAIN PANS AVAILABLE IN 20" DIAMETER FOR WATER HEATERS HAVING A DIAMETER 18" OR LESS, 24" DIAMETER FOR WATER HEATERS HAVING A DIAMETER 22" OR LESS AND AVAILABLE IN 20" DIAMETER FOR WATER HEATERS HAVING A DIAMETER 26" OR LESS Basic Tools You may or may not need all of these tools, depending on your type of installation. Sears store, These tools can be purchased at your local Pipe Wrench (2) Screwdriver 6 Foot Tape or Folding Rule Garden Hose Drill Pipe Dope or Teflon Tape GARDEN HOSE 6 FOOT TAPE SLOT_HEAD SCREW DRIVER PHILLIPS SCREWDRIVER PIPE WRENCH (SQUPEIPEEZEDOPTEUBE) ROLL OF TEFLON TAPE (Use only on water connections) DRILL ADDITIONAL TOOLS NEEDED WHEN SWEAT SOLDERING Tubing Cutters Propane Torch Soft Solder Solder Flux or Hacksaw Emery Cloth Wire Brushes HACKSAW 3/4" WIRE BRUSH I/2" WIRE BRUSH ROLL OF LEAD FREE SOFT SOLDER PROPANE TORCH ROLL OF EMERY CLOTH SOLDER FLUX TUBING CUTTER