Kenmore 37100 Owners Manual - Page 13

WARNING i lU u lUUUl,, Electrical Shock and Personal Injury Hazard Disconnect electrical supply before servicing or cleaning the unit, Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting. TO REMOVE LIGHT BULB 1. Disconnect power cord from etec_cal outlet 2. Press handle release pedal and lay vacuum cleaner back. 3. Remove the two (2) screws from the lens cover. CAUTION Do not use a bulb rated over 9W (13V), During extended use, heat from the bulb could overheat surrounding plastic parts. 5, Pull bulb out of _ twoicskt.et°GeDnotlyNOpTush replacement bulb into socket to replace.. 6. Snap lens cover back into place and secure the headlight lens by replacing the two screws. 4. insert flat blade of screwdriver into slot at top of the lens. Lift the lens cover to remove. Note: See separate PARTS LIST for bulb number,, Gather the cord and wrap it loosely around the upper and lower cord hooks° Lock power cord plug onto the power cord,, Store the vacuum cleaner in a dry, indoor area, on the floor with the handle locked in the upright position. WARNING Electrical Shock and Personal Injury Hazard Wrapping the cord too tightly puts stress on the cord and can cause cord damage. ii I3