Kenmore 4413 Use and Care Guide - Page 8

TOADJUSTTHESHELVES o Lift front edge up. o Pull shelf out o Replace the shelf by inserting the hooks at rear of the shelf into the wall bracket. Lower the shelf into the desired slots and lock into position. To Remove Light Lens Press Tabs in Direction Shown. o/ \+ Mid Level Lighting AiR FILTER CRISPERS WiTH ADJUSTABLE DiViDERS The air filter is located on the back of the control box. In general, you should change the air filter every six months to ensure optimal filtering of freezer odors. You may want to adjust this time period depending on the types and amounts of food you typically store in your freezer. The crispers, located at the bottom of the freezer shelf, provide separate storage space for items that are difficult to store on freezer slelves. TO REPLACE THE AiR FILTER: • Push the plastic bubble tab at the back of the control box housing. This releases the hinged bottom half to drop open. • Remove the old filter and discard it. • Unpackage the new filter and place it inside the hinged bottom half of the qousing. • Push the qinged bottom half upward until the tab snaps into closed position. MiD LEVEL LiGHTiNG The mid level lighting is located at the back of the crispers. The lights come on automatically when the door is opened.To replace the light bulb, turn the temperature control to OFF and unplug the electrical cord. Remove the lens from the lamp housing by unsnapping it from the lamp housing using your fingers or a screwdriver. Be careful not to break the locking tabs on the lamp housing. Replace the old bulb with a bulb of the same type and wattage. To replace the lens, snap one side of the lens opening to the tab on the lamp housing. Then carefully attach the other side. DOOR MOUNTED TEMPERATURE The door mounted temperature gauge displays the cabinet internal temperature. GAUGE 8