Kenmore 464222209 Use and Care Guide - Page 24

sl ield

Page 24 highlights

Release the cap and nut from electronic ignition module. Attach electronic ignition module and heat shield to the cart left side panel with the nut, shown A. Insert AA battery into ignition module, negative (=) end first. Then put on the cap, shown B. Connect each of the wires from the main burner electrodes, and sideburner electrode into the back of the Electronic Ignition Module. Total (4) connections. Connect the two wires [(a) and (b)] from the switch wiring harness into the back of the Electronic Ignition Module. Total (2) connections. NOTE: Switchterminals are larger than electrode terminals and should only be installed in location shown as (a),(b). Heatsl ield Place the Condiment Basket on the right door inside; make sure to insert the legs of the Condiment Basket into the brackets which were attached on the door inside shown as below. 24,464222209

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Release the cap and nut from electronic ignition module. Attach electronic ignition module and heat shield to the cart left
side panel with the nut, shown A.
Insert AA battery into ignition module, negative (=) end first. Then put on the cap, shown B.
Connect each of the wires from the main burner electrodes, and sideburner electrode into the back of the Electronic Ignition
Module. Total (4) connections.
Connect the two wires [(a) and (b)] from the switch wiring harness into the back of the Electronic Ignition Module.
Total (2) connections.
NOTE: Switchterminals
are
larger
than
electrode
terminals
and
should
only
be installed in location shown
as
(a),(b).
Heat
sl ield
Place the Condiment Basket on the right door inside;
make
sure to
insert
the
legs
of the Condiment Basket
into
the
brackets which were
attached
on
the door
inside
shown as below.
24,464222209