Kenmore 6808 Use and Care Guide - Page 9
A UL listed
View all Kenmore 6808 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Put power supply cord through the strain relief. Be sure that the wire insulation on the power supply cord is inside the strain relief. The strain relief should have a tight fit with the dryer cabinet and be in a horizontal position. Do not further tighten strain relief screws at this point. Style 2: Direct wire strain relief Unscrew the removable conduit connector and any screws from a 3/4"(1.9 cm) UL listed strain relief (UL marking on strain relief). Put the threaded section of the strain relief through the hole below the terminal block opening. Reaching inside the terminal block opening, screw the removable conduit connector onto the strain relief threads. ......... C A. Removable conduit connector B. Hole below terminal block opening C. Strain relief threads Put direct wire cable through the strain relief. The strain relief should have a tight fit with the dryer cabinet and be in a horizontal position. Tighten strain relief screw against the direct wire cable. Electrical Connection Options If your home has: And you will be Go to Section: connecting to: 4-wire receptacle (NEMA type 14-30R) A UL listed, 120/ 4-wire connection: 240-volt Power Supply Cord 30-amp, dryer (_ mpoinwimerumsu, pply cord* 4-wire direct A fused disconnect or 4-wire connection: Direct Wire (12.7 cm) cbiorcxu* it breaker 3-wire receptacle (NEMA type 10-30R) A UL listed, 120/ 3-wire connection: 240-volt Power Supply Cord 30-amp, dryer _._ mpoinwimerumsu, pply cord* 3-wire direct A fused disconnect or 3-wire connection: Direct Wire cbiorcxu* it breaker *If local codes do not permit the connection of a cabinet-ground conductor to the neutral wire, go to "Optional 3-wire connection" section. 4-wire connection: Power supply cord IMPORTANT: A 4-wire connection is required for mobile homes and where local codes do not permit the use of 3-wire connections. B F CD E G A. 4-wire receptacle (NEMA type 14-30R) B. 4-prong plug C. Ground prong D. Neutral prong E. Spade terminals with upturned ends E _" (!.9 cm) UL listedstrain relief G. Ring terminals 1. Remove center silver-colored terminal block screw. 4= Now complete installation following instructions for your type of electrical connection: 4-wire (recommended) 3-wire (if 4-wire is not available