Kenmore 7850 Use and Care Guide - Page 24
Flushing the Water System After Replacing
UPC - 719192205871
View all Kenmore 7850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
FILTER It is recommended that you replace the filter when the water filter indicator icon turns on or your water dispenser or ice maker performance decreases noticeably. 2. Replace with a new cartridge. Take the new cartridge out of its packaging and remove protective cover from the o-rings. With cartridge knob in the vertical position, push the new filter cartridge into the cover until it stops. After changing the water filter cartridge, reset the water filter status display and indicator icon by pressing and holding the Filter Reset button for 3 seconds. 1. Remove the old cartridge. Place a container under the hole of filter holder. If you can't turn the filter from side to side, it isn't fully inserted. Push it in firmly and twist it into place. You will hear the snap when it clicks into place. Using its handle, twist the cartridge clockwise about 1/4 turn. You will hear the snap when it clicks into place. NOTE: When filter is being removed, the water drains through the hole. Rotate the knob of the cartridge counter clockwise. 3. Flushing the Water System After Replacing Filter Dispense water through the water dispenser for 3 minutes to purge the system. Pull out the filter cartridge. NOTE: To purchase replacement water filter cartridges, call 1-800-4-MY-HOME ®.Ask for part number 9990. 24