Kenmore 7997 Use and Care Guide - Page 12
Reversing, Reattaching, Refrigerator
View all Kenmore 7997 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
REVERSING AND REATTACHING REFRIGERATOR DOOR ° Using a 1/4" socket wrench, loosen and remove Hinge Pin from the Middle Hinge Bracket. Remove washer underneath the middle hinge and set aside. NOTE: At this point the door wiii be loose, lift up door slightly and remove it. * Remove Base Grille. See BASE GRILLE iNSTRUCTiONS. ° Remove the washer from the Bottom Hinge Pin. ° Using a 1/4" socket wrench, loosen and remove Hinge Pin from the Bottom Hinge. Reattach the Hinge Pin to the opposite side of the hinge. NOTE: This is easier to do while the hinge is still attached. 21 ° Loosen and remove the 2 bolts and use the phillips head screw to remove the Middle Hinge Bracket from refrigerator housing. Set parts aside. ° Using a 13/3 2 " socket wrench with 2-inch extension, loosen the 3 bolts and remove the Bottom hinge from right side of housing. J 13