Kenmore 7997 Use and Care Guide - Page 13

° At this point, remove the Decorative Bolt on bottom of refrigerator housing from the left side of refrJgeraton you will need this hole for the Bottom Hinge. J ° Take out the Hinge Pin insert and move the Bracket to the other side of the door, keeping the same orientation. ° Place Hinge Pin insert into the left side of the bracket. Tighten Hinge Pin Bracket to door. Hinge Pin Bracket Hinge Pin Insert Fig. 23 ° Move the Bottom Hinge to the left side of housing, keeping the same oreintation, and reattach with 3 bolts. Now move Decorative Bolt to hole on lower right side of housing. ° Take Door Closer/Stop and flip. Line up screw holes and mount on left side of door bottom with the two screws. Turn door upright. It is now ready for re-attaching. NOTE: The Refrigerator Door Closer/Stop is not used on all models. The model you have may note include this :art. _Fig. 28 _ Fig. 24 ° Turn refrigerator door upside down on a non-scratching surface. ° With door upside down, loosen the 2 screws and remove the Door Closer/Stop, the loosen the other two screws to remove the Bottom Hinge Pin Insert Bracket with Hinge Pin Insert. NOTE: The Refrigerator Door Closer/Stop is not used on all models. The model you have may not include this part. "Fig.25 ? DoorCloser/Stop ° With flat-head screwdriver, carefully pry off and remove the cover over the screw holes on the left side of refrigerator housing. Fig. 29 Fig. 26 Hinge Pin Hinge Pin insert 14