Kenmore 9751 Use and Care Manual - Page 32

Setting Oven Controls To Set the Recipe Recall Feature This feature will ONLY recall a Bake, Convection Bake, Cakes, Breads, Convection roast, Slow Cook, Cook Time or a Cook Time with a Warm & Hold added setting. This feature will not work with any other function including a Delay Start, a Clean Cycle or a Broil setting. Instructions To Program the Oven to Begin Baking Immediately and record a Recipe (example: for a Bake mode at 425°C) 1. Place the food in the oven. 2. Press . 3. Press (Fig. 1). 4. Press 4 2 5 (Fig. 2). 5. Press and hold pad for at least 3 seconds or until a beep sounds. The beep indicates that this recipe has been recorded for future recall. PRESS 4 2 5 for 3 seconds. DISPLAY Fig. 1 Fig. 2 To Program the Oven to Begin Baking with a stored Recipe 1. Place the food in the oven. 2. Press and then (Fig. 2). 3. The Temperature (and the cook time, if programmed) is recalled, the oven will begin immediately to cook with the previously recorded recipe. and then Restoring factory default settings When new, your appliance left the factory with predetermined oven control setting. Over time, the user may make changes to these settings. The following options have user preferences that could be modified and may have been changed since the appliance was new: 12 or 24 hour display mode; Continuous bake or 12-Hour Energy Savings mode; Silent or audible control; Oven temperature display (Fahrenheit or Celsius); Oven temperature adjustment; Any stored recipes; Accent Light brightness setting. Please remember that if you choose to restore, ALL of the above preferences will be restored to factory default settings, the oven temperature offset will reset and any stored information will be cleared. 1. Press and hold 7 keypad until first beep sounds (about 6 seconds). 2. Press . 32