Kenwood CD-2280M User Manual - Page 30

Timer operation (Mechanism-A only) Timer operation As this unit incorporate the timer standby function, play- 30 back can be started at desired moment if a commercially available audio timer is combined with this unit. Audio timer CD-2280M/DPF-J9010 (En) 12:00 To AC outlet Preparation ÷ Load discs into the carousel. ÷ Close the door panel. ÷ Select the Mechanism-A. 0 0 ! ÷ Connect the system components so that their power can be switched on by the timer. ÷ Read the instruction manual of the timer carefully. Amplifier or receiver This unit Audio cord : Keys and control used in the operations described on this page. 1 Set the power switches of the system components to the ON positions. 2 Select the disc to be played. 1 Select the disc number. ∞ DISC SKIP 5 Previous disc Next disc Within 8 seconds! 2 Play the disc. 6 ÷ The disc number can be selected directly by using the DISC SELECTOR and numeric keys in place of the DISC SKIP keys. ÷ If the selected disc is being played on Mechanism-B, blinking "DISCXXX BUSY!" is displayed. In this case, either stop Mechanism-B and select the same disc again, or select another disc. 3 Set the listening volume. 1 Adjust the volume on the amplifier or receiver. 2 Stop playback. 4 Set the timer for the desired ON time. 5 Set the TIMER PLAY switch to ON. ÷ Read the instruction manual of the timer carefully. TIMER PLAY OFF ON ÷ When the set time comes, playback will start automatically.