Kenwood DDX23BT North America - Page 42
Using the external navigation unit
View all Kenwood DDX23BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
OTHER EXTERNAL COMPONENTS Using the external navigation unit (Only for DDX416BT) You can connect a navigation unit (KNA-G630: optional accessory) to the NAV input terminal so that you can view the navigation screen. (Page 70) • The navigation guidance comes out of the front speakers even when you are listening to an audio source. ❏ Viewing the navigation screen On the Home screen: To exit the navigation screen On the pop-up short-cut menu (Page 12): Display the pop-up short-cut menu by pressing MENU on the monitor panel, then select [Current Source]. ❏ Settings for the navigation unit 1 Display the setting screen. On the Home screen: • While the navigation screen is displayed, the touch panel operations are available only for navigation. • The aspect ratio of the navigation screen is fixed to regardless of the setting (Page 55). When receiving a call during navigation guidance The screen is switched automatically. To return to the navigation screen, press [ ]. 2 Display the screen. 3 Select which front speakers are used for the navigation guidance. Adjust the volume of the navigation guidance. (0 to 35) Select [ON] to attenuate the sound coming out of speakers other than the front speakers during navigation guidance. • To cancel the attenuation, select [OFF]. Press [Enter] to display the setup screen for the navigation unit. See the instruction manual supplied for the navigation unit. 42