Kenwood DDX317BT Instruction Manual - Page 5
Clock settings - radio
View all Kenwood DDX317BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
INITIAL SETTINGS • To clear the registered security code, perform steps 1 and 2. On step 3, press [CLR]to display screen. Then, enter the current security code to clear and press [Enter]. • When the unit has been reset or disconnected from the battery, you are required to enter the security code. Enter the correct security code, then press [Enter]. To deactivate the security function: Select [OFF] for . Clock settings 1 Display the Home screen. On the monitor panel: ❏ Activating the security function You can activate the security function to protect your receiver system against theft. 1 Display the setting screen. On the Home screen: • You can change the page to display more items by pressing [ ]/[ ]. 2 Display the screen. 3 Set the clock time. *1 *2 *3 Synchronizes the clock time with the connected navigation unit. Synchronizes the clock time with FM Radio Data System. Synchronizes the clock time with the digital radio (DAB). Sets the clock manually. (See below.) When selecting : Adjust the hour (1), then adjust the minute (2). • Press [Reset] to set the minute to "00". 2 The security function is activated. The security indicator on the monitor panel flashes when the vehicle ignition is off. • You can also display the setting screen by touching the clock area on the Home screen. 4 Finish the procedure. *1 Only for DDX4017DAB/DDX4017BT: Appears only when a navigation unit is connected. *2 Only for DDX4017BT/DDX4017BTR/DDX317BT. *3 Only for DDX4017DAB. ENGLISH 5