Kenwood DDX4017BT Instruction Manual - Page 63
Installing the unit
View all Kenwood DDX4017BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
CONNECTION/INSTALLATION ❏ Installation procedure 1 To prevent a short circuit, remove the key from the ignition and disconnect the · Installing the unit ❏ Installing the unit ❏ Installing the trim plate Attach the trim plate (2). battery. 2 Make the proper input and output wire 2 connections for each unit. 3 Connect the speaker wires of the wiring harness. 4 Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5 Take Connector A on the wiring harness and connect it to the external power • Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. connector in your vehicle. 6 Connect the wiring harness connector to the unit. 7 Install the unit in your car. • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). 8 Reconnect the · battery. 9 Press the reset button. (Page 3) 10 Configure . (Page 4) ENGLISH 63