Kenwood DDX4019BT Instruction Manual - Page 35
<Rear Camera>, System settings, <Language>
View all Kenwood DDX4019BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Settings * Set the duraton (in seconds) to display the picture from the front view camera when you shift the gear from reverse (R) position to any other positions. • OFF (Initial)/5 sec/10 sec/15 sec/20 sec After the selected time, the screen return to the previous screen. * This setting is available only when and is set to [ON]. Configure the rear view camera settings. • ON: Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. - A caution message appears on the screen. To remove the caution message, touch the screen. • OFF (Initial): Select this when no camera is connected. • ON (Initial): Displays the parking guidelines. • OFF: Hides the parking guidelines. Adjust the parking guidelines according to the size of the car, parking space and so on. When adjusting the parking guidelines, make sure to use the parking brake to prevent the car from moving. System settings Display the screen. On the Home screen, touch as follows: Select the mark (1), then adjust the position of the selected mark (2). Initialize Then, on the screen, touch [System]. Setup Audio Language Display Clock Input Smartphone Setup System Bluetooth Setup Beep English Enter Enter Enter ON OFF Make sure that A and B are horizontally parallel, and that C and D are the same length. • Touch and hold [Initialize ] for 2 seconds to set all the marks to the initial default position. E.g. System settings screen Select the text language used for on-screen information. For details, see "Initial settings" on page 4. "Please Power Off" appears when the setting is changed. Turn off the power, then turn on to enable the change. ENGLISH 33