Kenwood DDX4019BT Instruction Manual - Page 43
Wiring connection
View all Kenwood DDX4019BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installation and Connection Wiring connection 10 A fuse ] Connect the antenna cord to the antenna terminal Front view camera input Purple with white stripe REVERSE USB cable (5 V 1.5 A) (1 m) To the car's reverse lamp harness when using the optional rear view camera Light green ¥ PRK SW White ] / White with black stripe [ Extension wire ( ø ) To front speakers (left) To the car's parking brake detection switch harness (For best safety, be sure to connect the parking sensor.) Gray ] / Gray with black stripe [ To front speakers (right) Green ] / Green with black stripe [ To rear speakers (left) Purple ] / Purple with black stripe [ Brown To rear speakers (right) MUTE Not used. Orange with white stripe ILLUMI To the car light control switch Light blue with yellow stripe STEERING WHEEL REMOTE INPUT REMOTE CONT To the OE remote adapter (not supplied) which is compatible with your car Blue with white stripe (12 V 350 mA) ANT.CONT To the power control terminal when using the optional power amplifier (Or) Red (Ignition wire) P.CONT To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna Yellow (Battery wire) Ignition key switch Car fuse Black (Ground wire) To the car chassis Car battery ENGLISH 41