Kenwood DDX417BT Instruction manual - Page 80
Connecting wires to terminals for DDX7051BT/DDX517BT
View all Kenwood DDX417BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
CONNECTION/INSTALLATION ❏ Connecting wires to terminals for DDX7051BT/DDX517BT See page 83. * If no connections are made, do not let the cable come out from the tab. 10 A fuse See page 83. See page 83. See page 83. 1 See page 84. REAR VIEW CAMERA VIDEO OUT Connect the antenna cord to the antenna terminal. Purple with white stripe (Reverse sensor wire) Light green (Parking sensor wire) USB terminal (1.0 m): See page 82. See page 83. See page 83. Connect to the vehicle's reverse lamp harness when using the optional rear view camera. Connect to the vehicle's 3 parking brake detection switch harness. • For best safety, be sure to connect the parking sensor. White ª / White with black stripe · : To front speaker (left) Gray ª / Gray with black stripe · : To front speaker (right) Green ª / Green with black stripe · : To rear speaker (left) Purple ª / Purple with black stripe · : To rear speaker (right) Light blue with yellow stripe (Steering remote control wire) Brown (Mute control wire) Blue with white stripe (Power control wire/Antenna control wire) (12 V 350 mA) Orange with white stripe (Dimmer control wire) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) 80 * To the remote adapter (not supplied) which is compatible with your car. Not used. To the power control terminal when using the optional power amplifier. (Or) To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna. To car light control switch. Ignition key switch To car chassis Fuse box Battery