Kenwood DDX5035BT Operation Manual - Page 36
Settings for Bluetooth devices
View all Kenwood DDX5035BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
BLUETOOTH Settings for Bluetooth devices You can change various settings for using Bluetooth devices on the screen. 1 Display the screen. On the screen: • You can also display the screen by pressing [ ] on the phone control screen. (Page 33) 2 Configure the Bluetooth settings. ❏ Setting items of registered devices. You can connect a device or delete registered devices. (Page 31) Changes the PIN code of the unit. (Page 30) Shows the device name to be shown on the Bluetooth device - DDX****. Shows the device address of the unit. • ON (Initial): The connection is automatically established with the last connected Bluetooth device when the unit is turned on. • OFF: Cancels. Bluetooth (both phone and audio player). • Front Only: Front speakers only. • All (Initial): All speakers. • ON: The unit answers the incoming calls automatically in 5 seconds. • OFF (Initial): The unit does not answer the calls automatically. Answer the calls manually. • ON (initial): Establishes pairing automatically with the connected iOS device (such as iPhone) even if the Bluetooth function is deactivated on the device. (Auto pairing may not work for some devices depending on the iOS version.) • OFF: Cancels. • System (Initial): The ring tone set on the unit is used. • Phone: The ring tone set on the mobile phone is used. (This function may not work depending on the mobile phone.) When is set to , select the ring tone for received calls and SMS from [Tone1] (Initial), [Tone2], [Tone3]. Hold [Enter] to reset all settings you have made for using Bluetooth mobile phone and Bluetooth audio player. 36