Kenwood DDX6033 User Manual - Page 79

Connecting Wires to Terminals Bluetooth Microphone (Accessory 6) DDX6033BT/ DDX6033BTM/DDX4033BT/ DDX4033BTM only Antenna Cord Extension cable (Accessory 7) Connect to vehicle's steering remote harness. Contact your Kenwood dealer for details. Subwoofer Preout (monaural) Purple/White (Reverse sensor wire) Light Green Connect to vehicle's reverse lamp harness when using the optional rear view camera. Extension cable (Accessory 2) FM/AM antenna input FUSE ( 10A ) Accessory 1 (Parking sensor wire) For best safety, be sure to connect the parking sensor. ⁄ Connect to the vehicle's parking brake detection switch harness. White ª / White/black · : To front speaker (left) Gray ª / Gray/black · : To front speaker (right) Green ª / Green/black · : To rear speaker (left) Purple ª / Purple/black · : To rear speaker (right) If no connections are made, do not let the cable come out from the tab. Blue (Antenna control wire) Blue/White (Power control wire) Brown (Mute control wire) Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. (Max. 300 mA, 12 V) When using the optional power amplifier or optional smartphone adapter (KCA-ML100), connect to its power control terminal. (☞ page 81) To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation manual.) Not used Orange/White (Dimmer control wire) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) · (To car chassis) To car light control switch ACC Ignition key switch Car fuse box (Main fuse) Battery English 79