Kenwood DDX6033BT User Manual - Page 29
Updating the firmware
View all Kenwood DDX6033BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Updating the firmware Check the firmware version, and if necessary, update the firmware. (You do not need to connect your smartphone.) • Do not turn off the power during update. 1 Visit the website (http:// kenwood.com/cs/ce/), download the update data, and save it to the root folder of an SD or SDHC card. 2 Use a ball-point pen or the like to remove the SD cover. While the power is on, insert the SD or SDHC card containing the update data. LED 5 Place the SD cover over the slot. 6 Press the reset button of the SMARTPHONE ADAPTER unit. 7 Display the firmware information screen to confirm that it has been updated successfully. (☞ page 28) Reset button SMARTPHONE ADAPTER unit (KCA-ML100) 3 Press the reset button of the SMARTPHONE ADAPTER unit. The update is completed successfully when the green LED lights up. (It takes approximately 30 seconds.) If the update fails, the red LED lights up. 4 Remove the SD or SDHC card. English 29