Kenwood DDX635WBT Operation Manual - Page 55
Connection
View all Kenwood DDX635WBT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
CONNECTION/INSTALLATION Connection ❏ Connecting wires to terminals for Toyota Cars USB terminal: Pages 56 - 57 Page 57 5 Page 57 Pages 56 - 57 Connect to the vehicle's steering remote harness. • Depending on the type of vehicle, it cannot be $ $ $ connected. Page 57 Purple with white stripe (Reverse sensor wire) Connect to the vehicle's reverse lamp harness when using the optional rear view camera. Connect the antenna cord to the antenna terminal. 1 10 A fuse 2 Connect to the vehicle's parking brake detection switch harness. • For best safety, be sure to connect the parking sensor. * Blue with white stripe (Power control wire) Brown (Mute control wire) When using the optional power amplifier, connect to its power control terminal. Not used. Connect to vehicle's harness. Connect to vehicle's harness. * If no connections are made, do not let the cable come out from the tab. Pin Color and functions of Connector A, B, and C A1 Orange/White Dimmer A2 Yellow Battery A4 Red Ignition (ACC) A5 Blue Antenna control A6 Black Ground connection A8/A7 White ª / White/Black · Left speaker (front) A10/A9 Gray ª / Gray/Black · Right speaker (front) B2/B1 Green ª / Green/Black · Left speaker (rear) B6/B5 Purple ª / Purple/Black · Right speaker (rear) C6 Gray/Red Ground C7 Light green/Red Input 1 C8 Purple/Red Input 2 ENGLISH 55