Kenwood DDX7015BT Operation Manual - Page 81

REFERENCES R HDMI interface section Connector Type TYPE-A R MHL interface section Supported Version MHL 2 Maximum Power Supply Current DC 5 V 900 mA R Bluetooth section Technology Bluetooth 3.0 + EDR Frequency 2.402 GHz to 2.480 GHz Output Power +4 dBm (MAX), 0 dBm (AVE), Power Class 2 Maximum Communication Range Line of sight approx. 10 m (32.8 ft) Audio Codec SBC/AAC/MP3/aptX/aptX Sprint* Profile HFP (Hands Free Profile) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) GAP (Generic Access Profile) PBAP (Phonebook Access Profile) SDP (Service Discovery Profile) SPP (Serial Port Profile) * aptX/aptX Sprint are compatible only with DDX5902. R DSP section Graphics equalizer DDX5902: BAND 7 Band Frequency (Hz) (BAND1-7) 62.5/160/400/1k/2.5k/6.3k/16k Gain -9/-8/-7/-6/-5/-4/-3/-2/ -1/0/1/2/3/4/5/6/7/8/9 dB DDX7015BT/DDX715WBT: BAND 5 Band Frequency (Hz) (BAND1-5) 62.5/250/1k/4k/16k Gain -9/-8/-7/-6/-5/-4/-3/-2/ -1/0/1/2/3/4/5/6/7/8/9 dB 2 Way X'Over HIGH PASS FILTER frequency Through/50/60/80/100/120/150/ 180/220 SLOPE -6/-12/-18/-24 dB/Oct. LOW PASS FILTER frequency 50/60/80/100/120/Through SLOPE -6/-12/-18/-24 dB/Oct. Position Front/Rear/Subwoofer Delay 0 ft to 20.0 ft (0.07 ft Step) Gain -8 dB to 0 dB Subwoofer Level -50 dB to +10 dB R FM tuner section Frequency Range DDX5902: 87.9 MHz to 107.9 MHz (200 kHz) DDX7015BT/DDX715WBT: 87.5 MHz to 108.0 MHz (50 kHz) Usable Sensitivity (S/N: 30 dB) 7.2 dBf (0.63 μV/75 Ω) Quieting Sensitivity (S/N: 50 dB) 15.2 dBf (1.58 μV/75 Ω) Frequency Response (±3.0 dB) Digital: 20 Hz to 20 kHz* Analog: 30 Hz to 15 kHz Signal to Noise Ratio Digital: 75 dB (STEREO)* Analog: 68 dB (MONO) Selectivity (±400 kHz) ≥ 80 dB Stereo Separation 40 dB (1 kHz) * Only for DDX5902. R AM tuner section Frequency Range (10 kHz) 530 kHz to 1 700 kHz Usable Sensitivity 29 dBμ Frequency Response (±3.0 dB) Digital: 40 Hz to 15 kHz* Signal to Noise Ratio Digital: 75 dB (STEREO)* * Only for DDX5902. ENGLISH 81