Kenwood DDX9705S User Manual - Page 70
Use Dashboard Camera, Display the dashboard camera, screen
View all Kenwood DDX9705S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Other External Components ■■[Front Camera Settings *]1 Adjusts the CMOS-3xx series with ID 2 ("Front Camera") set. For details, see the instruction manual of your camera. ■■[Front Camera Interruption] *2 [10 sec]/ [15 sec] (Default)/ [20 sec]: The front camera screen is displayed when return the gear from the reverse (R) position. [OFF]: Cancel. *1 When CMOS-3xx series is connected with this unit. *2 When CMOS-3xx series or front camera is connected with this unit. To adjust the parking guidelines NOTE • Install the rear view camera in the appropriate position according to the instruction manual supplied with the rear view camera. • When adjusting the parking guidelines, make sure to apply the parking brake to prevent the car from moving. 1 Touch [ON] of [Parking Guidelines] in the Camera screen. (P.69) 2 Touch [Guidelines SETUP] on the Camera screen. 3 Adjust the parking guidelines by selecting the mark. Make sure that lines A and B are horizontally parallel, and that lines C and D are of the same length. NOTE • Touch [Initialize] and then touch [Yes] to set all the marks to their initial default position. Use Dashboard Camera A Dashboard Camera, DRV-N520 (optional accessory), connected to this unit lets you play video-recorded data and so on. For details, see the instruction manual of the Dashboard Camera DRV-N520 (optional accessory). NOTE • To connect a dashboard camera, see P.95. ÑÑDisplay the dashboard camera screen 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Camera]. 4 Adjusting the position of the selected mark. A C D B 70 3 21 1 Switching the View Camera Touch to change the dashboard view camera and rear view camera. 2 Camera off Touch to exit the camera screen.