Kenwood DDX9705S User Manual - Page 92
Removing the trim plate, Except DDX9705S, Removing the unit, Securing the USB extension, cable
View all Kenwood DDX9705S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Connection/Installation ÑÑRemoving the trim plate (Except DDX9705S) 1) Engage the catch pins on the extraction key (accessory 5) and remove the two locks on the lower level. Lower the trim plate (accessory 8) and pull it forward as shown in the figure. 8 5 Catch Lock NOTE • Be careful to avoid injury from the catch pins on the extraction key. 4) Pull the unit all the way out with your hands, being careful not to drop it. NOTE • The trim plate can be removed from the top side in the same manner. 2) When the lower level is removed, remove the upper two locations. ÑÑSecuring the USB extension cable Secure the USB extension cable with insulating tape or the like so that its connectors are not disconnected. ÑÑRemoving the unit (Except DDX9705S) 1) Remove the trim plate by referring to step 1 in "Removing the trim plate". 2) Insert the two extraction key (accessory 5) deeply into the slots on each side, as shown. 5 3) Lower the extraction key toward the bottom, and pull out the unit halfway while pressing towards the inside. 92