Kenwood DNN990HD Quick Start Guide - Page 27
Installation Procedure, Continued
View all Kenwood DNN990HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installation Procedure Supplied accessories First of all, make sure that all accessories are supplied with the unit. 1 ...1 8 ...1 2 ...1 3 ...2 4 ...1 9 ...1 0...1 (3.5 m) - ...1 DNN990HD/ DNN770HD Unit 1 To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery. 2 Make the proper input and output wire connections for each unit. 3 Connect the speaker wires of the wiring harness. 4 Connect the wiring harness wires in the following order; ground, battery, ignition. 5 Connect the wiring harness connector to the unit. 6 Install the unit in your car. 7 Reconnect the ¤ terminal of the battery. 8 Press the button. (P.4) 9 Perform the Initial Setup. See First Step (P.7). ● Non-Japanese cars 5 ...1 6 ...6 (3 m) = *1 ...1 (3 m) ~ *1 ...1 Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. 7 ...6 *1 DNN990HD only EN 27 Continued