Kenwood DNX573S Instruction manual - Page 84
Security Setup, DNX7160BTS/ DNX5160BTS only - update
View all Kenwood DNX573S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Audio SETUP Clear Clears the AUDIO SETUP Memory and the currently memorized audio setting. Software Information Check the software version of this unit. (P.83) Open Source Licenses Displays the open source licenses. Initialize Touch [Initialize] and then touch [Yes] to set all the settings to the initial default settings. • Audio SETUP Memory is not initialized. Setting Up Security Setup You can set up a security code to protect your receiver system against theft. 1 Press the button/ volume knob. Popup menu appears. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [Security]. Software Information Check the software version of this unit. 1 Touch [Software Information] in the Special screen. Software Information screen appears. 2 Confirm the software version. Security screen appears. 4 Set each item as follows. NOTE • For how to update the software, see the relevant update procedure manual which comes with the software. SI A red indicator will blink on the unit after the ACC is set to OFF, warning potential thieves. If turned to "ON" (default), the security indicator on the front panel flashes when the vehicle ignition is off. Security Code Set *1 Register the security code for the unit. Security Code Cancellation *1 Clear the security code. Security Code Change *1 Change the security code. *1 DNX7160BTS/ DNX5160BTS only 83