Kenwood DNX7160 Instruction Manual - Page 82
Clock and Date Setup, Security Setup, Monitor Angle Control
UPC - 019048188366
View all Kenwood DNX7160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Setup Menu Clock and Date Setup You can adjust the clock time. 1 Display the Clock Setup screen Touch System] > [Clock]. (page 78) 2 Setup the Clock 1 Security Setup A red indicator will blink on the unit after the ACC is set to OFF, warning potential thieves. 1 Display the Security screen Touch System] > [Security]. (page 78) 2 Setup the SI (Security Indicator) 1 Adjusts month, day, year, hours, and minute. [Reset] Sets "00" minute. Setup examples: 3:00 - 3:29 \ 3:00 3:30 - 3:59 \ 4:00 [Synchronize] Sets the clock time in synchronization with the time data sent from the navigation system or the RDS station. ( DNX series: "Navigation", DDX series: "RDS") "OFF"/ "RDS"*1/ "Navigation" When the synchronized mode is set, the clock cannot be adjusted manually. (*1 North American sales area only) 3 Adjust the date or clock time [SI] Turns the SI function on or off. If turned "ON", the security indicator on the front panel flashes when the vehicle ignition is off. ( "ON") Monitor Angle Control You can adjust the position of the monitor. 1 Display the Angle Setup screen Touch System] > [Angle]. (page 78) 2 Set the Monitor Angle 1 1 Sets the Monitor angle. [Off Position] Stores the current monitor angle as the angle during power off. 82 DNX series DNX9960/ DNX7160/ DNX7020EX