Kenwood DNX7160 Instruction Manual - Page 95
Car Type DTA Setup
UPC - 019048188366
View all Kenwood DNX7160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
2 Display the Crossover setup screen 3 Set the crossover [Phase] Sets the phase of subwoofer output. The phase is reversed 180 degrees when set to "Reverse". (Only when "Subwoofer" is set to any item other than "None" in Speaker Setup) [HPF FREQ] High Pass Filter adjustment. (When front, center or rear speaker is selected on Speaker Select screen) [LPF FREQ] Low Pass Filter adjustment. (When Subwoofer is selected on Speaker Select screen) [Slope] Sets a crossover slope. Car Type (DTA) Setup You can setup the car type and speaker network, etc. 1 Display the Car Type Setup screen Touch [ ] > [ ] > [Audio SETUP] > [Car Type]. (page 78) 2 Setup the Car Type If your car type is selected, the Digital Time Alignment and Equalizer is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. 1 1 Sets up the car type you use together with this unit. You can choose according to type of your car. "OFF", "Compact", "Full Size Car", "Wagon", "Minivan", "SUV", "Minivan (Long)" [Location] Sets the locations of the speakers. [Adjust] Displays the Car Type Adjust screen. You can adjust the digital time alignment that was set automatically when you selected the car type. DDX series DDX896/ DDX8046BT Next page 3 English 95