Kenwood DPX-8030MD User Manual - Page 17
Sound Field Setting, DSPDigital Signal Processor System, Preset Equalizer Curve Selection, Setting
View all Kenwood DPX-8030MD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Non-Fading level cannot be preset into the memory. DSP(Digital Signal Processor) System Turning the DSP effects ON or OFF. A DSP is a device which uses digital control to correct the audio signal and produce sound effects that can compensate for the small passenger compartment of a vehicle. Turn DSP System ON Press the [DSP] button. "DSP CONTROL MODE" is displayed. Turn DSP System OFF Press the [DSP] button for at least 1 second. "DSP OFF" is displayed. Sound Field Setting This function reproduces many different virtual sound fields. 1 Enter the DSP control mode Press the [DSP] button. "DSP CONTROL MODE" is displayed. 2 Selecting the sound field setting Press the [DSP] button. Each time the button is pressed the sound field setting switches as shown below. Setting Stadium Concert Hall Club Disco Church Listening Bypass Display "STADIUM" "CONCERT" "CLUB DISCO" "CHURCH" "LISTENING" "BYPASS" When operation stops for 10 seconds, the Sound Field Setting closes. Preset Equalizer Curve Selection Recall the preset equalizer curve classified in groups. 1 Enter the Equalizer control mode Press the [EQ] button. "EQ CONTROL MODE" is displayed. 2 Select an equalizer curve Press the [EQ] button. Each time the button is pressed the preset equalizer curve switches. Setting Display Flat Rock Pops Dance Vocal "Flat" "Rock" "Pops" "Dance" "Vocal" When Equalizer Curve is adjusted, the selection starts from "User". Ending of Equalizer control mode Press the [EQ] button for at least 1 second. When operation stops for 10 seconds, the Equalizer control mode closes. - 17 -