Kenwood DPX-8030MD User Manual - Page 30

English Function Setting System Function items in Standby: Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP On" "BEEP Off" Setting Beep is heard. Beep canceled. Opening Demonstration Setting the Demonstration when Power is turned ON. Display "Opening On" "Opening Off" Setting Demonstration is carried out when Power is turned ON. Demonstration is not carried out when Power is turned ON. Switching preout Switching the preout between the rear and non-fading. (In nonfading it outputs without effect from the fader control.) Display "Preout Rear" "Preout N-F" Setting Rear preout. Non-fading preout. MD Group Setting Switching ON and OFF the MD Group function. Display "MD Group On" "MD Group Off" Setting Group management function is ON. Group management function is OFF. The MD group functions of Group Search, Group Repeat Play, Group Random Play and Group Select are available when an MD with group registration is played if is ON. Because any track without group registration is not played, register it into any group or turn OFF. For MD Group refer to (page 8). Security Code Because authorization by the Security Code is required when it's removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft. When the Security Code function is activated, the code can't be changed and the function can't be released. Note, the Security Code can be set as the 4 digit number of your choice. 1 Select Security Code mode Press the [FM] or [AM] button. Select the "CODE STBY" display. 2 Enter Security Code mode Press the [38] button for at least 2 seconds. When "CODE WRITE" is displayed, "CODE ****" is displayed. 3 Enter the Security Code Press the [#1] - [#4] button. - 30 -