Kenwood DPX-MP4050B User Manual - Page 24

English Function Set Illumination Color Mode Setting the Illumination Color Mode of your display. Display "COL Sync" "COL Fix" Setting The color of your display changes from one color to another during volume adjustment and during Attenuator being ON. Fix the color set. Contrast Adjustment Adjusting the display contrast. Display and Setting "CONT 1" "CONT 7" (Original setting) "CONT 11" ...... Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP On" "BEEP Off" Setting Beep is heard. Beep canceled. Switching preout Switching the preout between the rear and non-fading. (In nonfading it outputs without effect from the fader control.) Display "Pout R" "Pout N-F" Setting Rear preout. Non-fading preout. Opening Demonstration Setting the Demonstration when Power is turned ON. Display "Open On" "Open Off" Setting Demonstration is carried out when Power is turned ON. Demonstration is not carried out when Power is turned ON. Equalizer mode Setting the method of adjusting Equalizer types. 1 Select Equalizer mode Press the [FM] or [AM] button. Select the "EQ" display. 2 Select the method of adjusting Equalizer types Press the [4] or [¢] button for at least 1 second. Each time the button is pressed for at least 1 second, method of adjusting Equalizer type switches as shown below: - 24 -