Kenwood DPX501BT User Manual - Page 29
Device Delete, Echo Cancel - delete bluetooth
View all Kenwood DPX501BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
TROUBLESHOOTING Bluetooth® Bluetooth® Symptom No Bluetooth device is detected. Bluetooth pairing cannot be made. Echo or noise is heard during a phone conversation. Phone sound quality is poor. Voice calling method is not successful. Sound is being interrupted or skipped during playback of a Bluetooth audio player. The connected Bluetooth audio player cannot be controlled. Remedy • Search from the Bluetooth device again. • Reset the unit. ( 3) • Make sure you have entered the same PIN code to both the unit and Bluetooth device. • Delete pairing information from both the unit and the Bluetooth device, then perform pairing again. ( 15) • Adjust the microphone unit's position. ( 15) • Check the [ECHO CANCEL] setting. ( 16) • Reduce the distance between the unit and the Bluetooth device. • Move the car to a place where you can get a better signal reception. • Use voice calling method in a more quiet environment. • Reduce the distance from the microphone when you speak the name. • Make sure the same voice as the registered voice tag is used. • Reduce the distance between the unit and the Bluetooth audio player. • Turn off, then turn on the unit and try to connect again. • Other Bluetooth devices might be trying to connect to the unit. • Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). (Refer to the instructions of your audio player.) • Disconnect and connect the Bluetooth player again. Symptom "DEVICE FULL" "N/A VOICE TAG" "NOT SUPPORT" "NO ENTRY" / "NO PAIR" "ERROR" "NO INFO" "HF ERROR XX" / "BT ERROR" Remedy The number of registered devices has reached its limit. Retry after deleting an unnecessary device. ( 19, DEVICE DELETE) Make sure the same voice as the registered voice tag is used. The connected phone does not support Voice Recognition feature. There is no registered device connected/found via Bluetooth. Try the operation again. If "ERROR" appears again, check if the device supports the function you have tried. Bluetooth device cannot get the contact information. Reset the unit and try the operation again. If this does not solve the problem, consult your nearest service center. ENGLISH 27