Kenwood DRV-A301W Operation Manual - Page 55
The message Please Format
View all Kenwood DRV-A301W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
The device shuts down on its own Auto power off function will turn off the device automatically after it loses its power supply. Make sure the device is connected properly to the car power cable. The device does not charge in my car If your cigar lighter adapter cable is not working properly with your device, check your car's power fuses. Also check your power cord and replace it if there is an issue. SD Card is not letting me view my files Try some different card readers and computers to see if any of them can view the files. If none of them work, the files are probably damaged. Use the device to format the memory card.(WARNING: formatting the memory card will remove all the files saved), We recommend the branded memory cards with Class 10. Note: You must format the SD card with the device for first time use. I cannot delete the file on the device Be sure the file you are trying to delete is unprotected. If the file is protected, please follow the instruction on page 29 to unprotect the file first, and then delete the file. My screen turns off after I just turned it on The screen saver function turns off the screen after a period of inactivity. If you want to turn off this function, go to SETUP menu -> Screen Saver, and turn it off. The message "Please Format SD Card" appears on my screen The device requires formatting the SD card if the card is used on the device for the first time. Please format the SD card in the SETUP menu. The device does not charge A "Card Error" message appears on my device Be sure the power cord is connected properly. When the device is being charged, the blue LED indicator will illuminate. This indicates that the SD card is not properly formatted to your device. Please remove the files you would like to keep on to your computer, and perform a "Format SD Card" procedure to allow your memory card to function properly with the device. A "Card Full" message appears on my device The device always turn on by itself. When this message appears, your SD card is at full capacity. Reminder: When you have protected files, you limit the use of your memory card. Delete unnecessary files to allow maximum use of your memory card. The parking mode function will automatically start recording a 30 second video clip and turn off when external forces are detected. If you want to turn off this function, go to SETUP menu -> Parking Mode Sensor, and turn it off. 52