Kenwood DVT-6200 User Manual - Page 13
Connecting to a TV, Connecting to a Satellite Tuner
View all Kenwood DVT-6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting to a TV TV System Connections 13 DVT-6200 (EN/K,E,X) The S-Video output terminal of this unit is only for output of the built-in Note DVD player. The output of equipment connected to VCR, CABLE/SAT is put out as a composite signal. Preparations *COMPOSITE Video cord (accessory) S-Video cord COMPONENT Video cord * For Europe only If your TV set has a SCART terminal, connect the accessory SCART plug to the SCART terminal of the TV and connect the COMPOSITE video cord. **0nly for some areas. Note **COMPONENT connection corresponds only to some areas. When the TV has a COMPONENT terminal, the DVD image will be played back with higher picture quality in case of COMPONENT connection. Connect the S-video or the COMPOSITE video cable also in this case. Select the scanning method of the Component Video output using the PROGRESSIVE (ACTIVE EQ.) key on the front panel. Depressed and keep pressing the key. Each time the key is being held down, the setting changes as follows. 1 ON 2 OFF ON: When progressive scanning is unavailable with certain discs, the scanning method is switched automatically to interlaced scanning. When the scanning method is changed, the scanning status will be displayed for a few seconds. OFF: Scanning method is fixed at interlaced scanning. Connecting to a Satellite Tuner Satellite tuner Example for some areas COMPOSITE video cord Audio cord