Kenwood KCA-DR300 Operation Manual - Page 16

ƒƒ G-Sensor Sensitivity The G sensor detects the car's movement forwards/backwards (X), to the right/left (Y), and upwards/downwards (Z). In case of an event, the G sensor will prompt the recorder to start recording automatically. You need to adjust the G sensor sensitivity depending on your driving style and road condition. Please note that it is harder to trigger when you set the sensitivity level lower. - Emergency: Sets the sensitivity level (6 levels, from Low to High) of the G sensor that allows automatical triggerring of the emergency recording while continuous recording is in progress. The event recordings will be stored in the "Emergency" category. - Parking Mode: Sets the sensitivity level (3 levels, from Low to High) of the G sensor that allows to automatical triggerring of the parking recording when the recorder is in Parking mode. The parking recordings will be stored in the "Parking" category. ƒƒ System Allows you to change the system settings of the device. - GPS Status: Displays the status of GPS signal reception. - Date/Time: Sets the system date and time. For more information, see the "Setting the date and time" section. - Beep Alert: Enables or disables system notification sounds. - Volume: Adjusts the volume level. - LCD Standby: Sets Always On or selects how long (10 sec, 1 min or 3 min) the screen remains lit after you press any key. - Language: Sets the language. - Distance Unit: Sets the preferred distance unit. - Storage Allocation: The system provides four default memory configurations 15