Kenwood KCA-R70FM Instruction Manual - Page 7

Channel Preset Memory Putting the channel in the memory. 1 Select the preset band Press the [u] button. 2 Select the channel to put in the memory Press the [4] or [¢] button. 3 Put the channel in the memory Press the [#1] - [#6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 channel can be put in the memory on each [#1] - [#6] button. Only the channel number is stored. Category information is not stored. Preset Tuning Calling up the channels in the memory. 1 Select the preset band Press the [u] button. 2 Call up the channel Press the [#1] - [#6] button. 2 Release it when the channel you want to listen to is received Press the [SEEK] button for at least 1 second. Channel Search You can switch from Up/Down of Channel in a category being selected to Previous/Next of Category that includes Channel being received and vice versa. 1 Enter Channel Search mode Press the [SRCH] button. 2 Select the Category Press the [u] or [d] button. 3 Select the Channel Press the [4] or [¢] button. Canceling Channel Search Press the [SRCH] button. You cannot operate this unit until all the Category information is acquired. Channel Scan Scanning for the channel you want to listen to. 1 Start Channel Scan Press the [SEEK] button for at least 1 second. "SCAN" indicator is ON. -7-