Kenwood KCA-R71FM Instruction Manual - Page 23

MP3 source ? Cannot play an MP3.67 ✔ The disc format is not accepted in the unit connected. ☞ Refer to the instruction manual of the disc changer (slave unit) for creation of compatible formats. ✔ The MP3 has no or invalid track name extension.68 ☞ Add the ".MP3" extension to the MP3 track name. ✔ The media is scratched or dirty.69 ☞ Clean the media. ? Noise or no sound generated when an MP3 is played.70 ✔ The track has the MP3 track name extension while it is not an MP3. ☞ Do not use the ".MP3" extension in non-MP3. ? Takes time before the unit starts playing MP3.71 ✔ The medium contains many discs, tracks, and hierarchical levels. ☞ The unit checks all tracks on the loaded medium first. If the medium has many tracks recorded, it may take a long time for the unit before it starts playing MP3. ? Fails to play MP3 in the intended order.72 ✔ The MP3 tracks were not written by the CD writer in the order in which you wanted them to be played. ☞ Depending on the CD writer, you may be able to set the order in which MP3 tracks are to be played by writing them onto a medium with their track names beginning with play sequence numbers such as "01" to "99". ? The sound skips when an MP3 is being played.73-1 ✔ The media is scratched or dirty. ☞ Clean the media. ✔ The recording condition is bad.73-2 ☞ Record the media again or use another media. ? The songs in the selected folder aren't played in Folder Search mode.77 ✔ There are no MP3 in the selected folder. ☞ Make sure there's recorded content in the MP3 media. ? The MP3 track search takes time.78 ✔ Many tracks are recorded on the media. ☞ When the media directory is complex, the track search can take time. - 23 -