Kenwood KDC-110UR Instruction Manual - Page 15
Display Settings
View all Kenwood KDC-110UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
AUDIO SETTINGS DISPLAY SETTINGS PRESET EQ DRIVE EQ/TOP40/POWERFUL/ROCK/POPS/EASY/JAZZ/NATURAL/ USER: Selects a preset equalizer suitable to the music genre. (Select [USER] to use the settings made in [EQ PRO].) [DRIVE EQ] is a preset equalizer that reduces noise outside the car or running noise of the tyres. BASS BOOST LEVEL1/LEVEL2/LEVEL3 or LV1/LV2/LV3: Selects your preferred bass boost level. ; OFF: Cancels. LOUDNESS LEVEL1/LEVEL2 or LV1/LV2: Selects your preferred low and high frequencies boost to produce a well-balanced sound at a low volume level. ; OFF: Cancels. SUBWOOFER SET* ON: Turns on the subwoofer output. ; OFF: Cancels. LPF SUBWOOFER* THROUGH: All signals are sent to the subwoofer. ; 85HZ/120HZ/160HZ: Audio signals with frequencies lower than 85 Hz/120 Hz/160 Hz are sent to the subwoofer. SUB-W PHASE* REVERSE (180°)/NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [LPF SUBWOOFER].) FADER R15 to F15 (0): Adjusts the rear and front speaker output balance. BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance. VOLUME OFFSET For AUX: -8 to +8 (0) ; For other sources: -8 to 0: Preset the initial volume level of each source. (Before adjustment, select the source you want to adjust.) SOUND RECNSTR ON: Creates realistic sound by compensating the high-frequency (Sound reconstruction) components and restoring the rise-time of the waveform that are lost in audio data compression. ; OFF: Cancels. • [SUB-W LEVEL]/[SUBWOOFER SET]/[LPF SUBWOOFER]/[SUB-W PHASE] is selectable only if [SWITCH PREOUT] is set to [SUBWOOFER] or [SUB-W]. ( 4) • [SUB-W LEVEL]/[LPF SUBWOOFER]/[SUB-W PHASE] is selectable only if [SUBWOOFER SET] is set to [ON]. * Except for / / / / Set the dimmer Press and hold DISP (DIMMER) to turn on or off the dimmer. • If you have set [DIMMER TIME] ( 12), it will be canceled once you press and hold this button. Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item ( 12), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press and hold to exit. To return to the previous setting item, press . ENGLISH 11