Kenwood KDC-110UR Instruction Manual - Page 21

INSTALLATION/CONNECTION Wiring connection When connecting to an external amplifier, connect its ground wire to the car's chassis to avoid damaging the unit. Antenna terminal Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles You may need to modify the wiring of the supplied wiring harness as illustrated below. Output terminals * A7 (Red) Vehicle A4 (Yellow) Default wiring Ignition wire (Red) Unit Battery wire (Yellow) Yellow (Battery wire) Red (Ignition wire) Pin Color and function A4 Yellow : Battery A5 Blue/White : Power control A7 Red : Ignition (ACC) A8 Black : Earth (ground) connection B1 Purple ] B2 Purple/black [ : Rear speaker (right) B3 Gray ] B4 Gray/black [ : Front speaker (right) B5 White ] B6 White/black [ : Front speaker (left) B7 Green ] B8 Green/black [ : Rear speaker (left) Red (A7) Yellow (A4) ISO connectors Fuse (10 A) If your car does not have an ISO terminal: We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Part list for installation * : Not available (A) Faceplate If no connections are made, do not let the wire come out from the tab. (B) Trim plate Light blue/yellow (Steering remote control wire) STEERING WHEEL REMOTE INPUT REMOTE CONT To the steering wheel remote control adapter Blue/White ANT CONT (Power control wire/ P. CONT Antenna control wire) Brown (Mute control wire) MUTE To the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle To the terminal that is grounded when the telephone rings or during conversation ( 13) (To connect the Kenwood navigation system, refer your navigations manual.) (C) Mounting sleeve (D) Wiring harness (E) Extraction key ENGLISH 17