Kenwood KDC 132 Instruction Manual - Page 21
Disc source, The messages shown below display your, systems condition.
UPC - 019048164322
View all Kenwood KDC 132 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Disc source ? The specified disc does not play, but another one plays instead. ✔ The specified CD is quite dirty. ☞ Clean the CD. ✔ The disc is loaded in a different slot from that specified. ☞ Eject the disc magazine and check the number for the specified disc. ✔ The disc is severely scratched. ☞ Try another disc instead. ? A CD ejects as soon as it is loaded. ✔ The CD is quite dirty. ☞ Clean the CD, referring to the CD cleaning of the section on (page 6). ? Can't remove disc. ✔ The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. ☞ The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. ? The disc won't insert. ✔ There's already another disc inserted. ☞ Press the [0] button and remove the disc. The messages shown below display your systems condition. E-04: The CD is quite dirty. The CD is upside- down. The CD is scratched a lot. ➪ Clean the CD and load it correctly. E-99: The unit is malfunctioning for some reason. ➪ Press the reset button on the unit. If the "E-99" code does not disappear, consult your nearest service center. IN (Blink): The CD player section is not operating properly. ➪ Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center. English | 21