Kenwood KDC 135 Instruction Manual - Page 13

In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "CLCK" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [4] or [¢]. 4 Exit Clock adjustment mode Press the [MENU] button. In Standby mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "On DSI" "OFF DSI" Setting LED flashes. LED OFF. In FM reception CRSC (Clean Reception System Circuit) Temporarily have reception alternate from stereo to mono to reduce multi-path noise when listening to the FM station. Display "On CRSC" "OFF CRSC" Setting The CRSC is ON. The CRSC is OFF. ⁄ • Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF. In Standby mode Built-in Auxiliary input Setting Set the Built-in Auxiliary Input function. Display Setting "OFF AUH" When selecting the source there's no Auxiliary Input. "On AUH" When selecting the source there's Auxiliary Input. Function of KDC-135 In Standby mode Switching preout Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.) Display "REAR" "SUB" Setting Rear preout. Subwoofer preout. English | 13