Kenwood KDC-248U Owners Manual - Page 7
Listening, radio - remote control
UPC - 019048191786
View all Kenwood KDC-248U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
SWITCH PRE REAR*1SUB-W: Selects whether rear speakers or asubwoofer are connected to the line out terminals on the rear of the unit (through an external amplifier). I SP SELECT OFF*1 5/41 6 x 9/6/ OEM: Selects the speaker size for optimum performance. F/W UP xX.xx IYES: Starts upgrading the firmware. ; NO*: Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/ Listening to the radio Hold for about 2 seconds to memorize the current station. • Press briefly to recall memorized station. 1 Press SRC to select "TUNER." 2 Press BAND repeatedly to select a band (FM 1/ FM2/ FM3/ AM). 3 Press ~ 1~ to search for a station. Adjust [SETTINGS] mode settings While listening to the radio... 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. See table below for selection. 4 Hold ~ to finish the procedure. '::Jlf~;$f'~. Selects the tuning mode for ~ I ~ buttons. AUTOl *: Automatically search for astation. ; AUT02: Search in the order of the stations in the preset memory. ; MANUAL: Manually search for astation. AUTO MEMORY YES: Automatically starts memorizing 6stations with good reception. ; NO*: Cancels (automatic _ _~ not activated). (Selectable only if [NORM] is selected for [PRESET TYPE].) (page 6) ! MONO SET ON: Improve the FM reception (but the stereo effect may be lost).; OFF*: Cancels (stereo effect resumes). Using the remote controller (RC-40S) FM+ / AM- : Selects band. ~ 1~ (+) : Selects station. 1- 6 : Selects preset station. 7