Kenwood KDC-6051U User Manual - Page 35
Demonstration mode Setting, Muting volume upon reception of Phone call, Theft Deterrent Faceplate
View all Kenwood KDC-6051U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Demonstration mode Setting Turning the demonstration mode ON/OFF. 1 Enter Menu List mode Press the [MENU] button. 2 Enter Demonstration mode setting Turn the [VOL] knob and press it when the desired item is displayed. Select "DEMO Mode". 3 Set the Demonstration mode Turn the [VOL] knob and press it when the desired item is displayed. Select "ON" or "OFF". 4 Exit Menu List mode Press the [MENU] button. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate 1 Press the Release button. Drop open the faceplate. 2 Drawing the faceplate to left side pull it to forward and remove it. Function of KDC-6051U Muting volume upon reception of Phone call The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to (page 63). ¤ • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. • Keep the faceplate in its faceplate case while detached. • Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 3 Align the shaft on the unit with the depression on the faceplate. 4 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. English | 35