Kenwood KDC-BT558U User Manual - Page 19
Troubleshooting - protect
View all Kenwood KDC-BT558U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
MORE INFORMATION About iHeartRadio • iHeartRadio® is a third-party service, therefore the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable. • Some iHeartRadio® functionality cannot be operated from this unit. About Bluetooth • Depending on the Bluetooth version of the device, some Bluetooth devices may not be able to connect to this unit. • This unit may not work with some Bluetooth devices. • Signal conditions vary, depending on the surroundings. • For more information about Bluetooth, visit the following website: www.kenwood.com/cs/ce/ TROUBLESHOOTING Symptom Sound cannot be heard. "PROTECT" appears and no operations can be done. • Sound cannot be heard. • The unit does not turn on. • Information shown on the display is incorrect. The unit does not work at all. For KMR-D558BT : The Auto Power Off function (that turns the power off after 20 minutes when in standby mode) does not work. • Radio reception is poor. • Static noise while listening to the radio. "NA FILE" appears. "NO DISC" appears. "TOC ERROR" appears. "PLEASE EJECT" appears. Disc cannot be ejected. Remedy • Adjust the volume to the optimum level. • Check the cords and connections. Check to be sure the terminals of the speaker wires are insulated properly, then reset the unit. If this does not solve the problem, consult your nearest service center. Clean the connectors. ( 2) Reset the unit. ( 3) Make sure [OFF] is selected for [DEMO MODE]. ( 4) • Connect the antenna firmly. • Pull the antenna out all the way. Make sure the disc contains supported audio files. ( 18) Insert a playable disc into the loading slot. Make sure the disc is clean and inserted properly. Reset the unit. If this does not solve the problem, consult your nearest service center. Press and hold M to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit. ( 3) ENGLISH | 19