Kenwood KDC-BT568U Instruction manual - Page 22
BLUETOOTH - Mobile phone, Receive a call, Connect with a remote device by One-touch NFC
View all Kenwood KDC-BT568U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
BLUETOOTH® Connect with a remote device by One-touch (NFC) Near Field Communication (NFC) enables short-range wireless communication between the unit and remote devices such as smartphones. By holding an NFC-compatible remote device near to the N-Mark on the unit (right side of the panel), the unit and remote device proceed to complete pairing and established the BLUETOOTH connection automatically. 1 Activate the NFC function on the remote device. Refer to the instruction manual of the remote device for more information. 2 Hold the remote device near to the N-Mark on the unit (right side of the panel). The device vibrates when pairing is completed. BLUETOOTH - Mobile phone Receive a call When there is an incoming call: • ZONE 2 illuminates in green color and flashes. • The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 19) During a call: • ZONE 1 illuminates according to the settings made for [DISPLAY] ( 28) and ZONE 2 illuminates in green color. • If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected. The following operations may differ or not available depending on the connected phone. • Depending on the type of remote device used, the strength of the NFC signal may vary. For a stronger NFC signal, user must understand the position of the remote device's NFC antenna and hence tap the NFC antenna with the NFC logo. • To disconnect, hold the remote device near to the N-Mark on the unit again. • This unit only can recognize and connect to one NFC-compatible device at a time. To First incoming call... Answer a call Reject a call End a call On the faceplate On the remote control Press or the volume Press . knob or one of the number buttons (1 to 6). Press . Press . Press . Press . 18 ENGLISH