Kenwood KDC-BT568U Instruction manual - Page 41
Part list for, installation, Wiring connection
View all Kenwood KDC-BT568U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
INSTALLATION/CONNECTION Wiring connection IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. MIC (Microphone input terminal) ( 17) Output terminals (For ) To Kenwood Marine Remote Control unit, KCA-RC55MR (optional accessory) USB 1 cable (DC 5 V 1.5 A) (For / ) USB 2 cable (DC 5 V 1.5 A) Antenna terminal Fuse (10 A) Expansion port (12 V 500 mA) To the optional SiriusXM Vehicle Tuner (commercially available) ( 14) Auxiliary cable To front speaker (left) White White/Black If no connections are made, do not let the wire come out from the tab. To front speaker (right) To rear speaker (left) Gray Gray/Black Green Green/Black Brown (Mute control wire) To connect the Kenwood navigation system, refer your navigation manual To rear speaker (right) Purple Purple/Black Ignition switch Car fuse box Red Blue/White (Power control wire/ Antenna control wire) (12 V 350 mA) To the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle Battery Car fuse box (Ignition wire) Yellow (Battery wire) Light blue/yellow (Steering remote control wire) To the steering wheel remote control adapter Black (Ground wire) To the metallic body or chassis of the car When connecting to an external amplifier, connect its ground wire to the car's chassis to avoid damaging the unit. Part list for installation (A) Faceplate (B) Trim plate (C) Mounting sleeve (D) Wiring harness (E) Extraction key (F) Screws (supplied for / ) ENGLISH 37