Kenwood KDC-BT61U User Manual - Page 63

Connecting Wires to Terminals To USB device USB connector (1m) Microphone input (KDC-BT61U only) ⁄ Do not remove the cap when you do not use the USB cable. The connector will cause the unit to malfunction if it gets in touch with any metallic part of the vehicle. Microphone (Accessory 3) RL Fuse (10A) R L Rear output Front output Sub Woofer output Antenna Cord FM/AM antenna input (JASO) AUX input (Stereo) Use the mini-plug which is stereo type and does not have any resistance. Wiring harness (Accessory 1) To Kenwood disc changer/External optional accessory ⁄ To connect these leads, refer to the relevant instruction manuals. Light Blue/Yellow (Steering remote control wire) Brown (Mute control wire) REMOTE CONT STEERING WHEEL REMOTE INPUT MUTE If no connections are made, do not let the wire come out from the tab. To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required. To connect the Kenwood navigation system, consult your navigation manual. ⁄ Connect to the terminal that is grounded when either the telephone rings or during conversation. (KDC-6051U only) Blue/White (Power control/ Antenna control wire) Yellow (Battery wire) Red (Ignition wire) P.CONT ANT.CONT ⁄ See next page Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle. Red (A-7 Pin) Yellow (A-4 Pin) 864 2 75 31 8 64 2 75 31 Connector A Connector B English | 63