Kenwood KDC-HD262U User Manual - Page 5

HD Radio™ tuner You can tune in to both conventional and HD Radio broadcasts. • To find HD Radio stations in your area, visit . Select an HD Radio multicast channel Many HD Radio stations offer more than one channel programming. This service is called multicasting. While receiving HD Radio multicast channels.... Press S / T to select your desired channel (HD1 to HD8). "LINKING" appears while linking to a multicast channel. Search for a station or channel 1 Press to select HD RADIO. 2 Press repeatedly (or press select FM1/ FM2/ FM3/ AM. 3 Press S / T (or press S / station or channel. / on RC-406) to on RC-406) to search for a • To change the searching method for S / T: Press repeatedly. AUTO1 : Automatically search for a station or channel. AUTO2 : Search for a preset station or channel. MANUAL : Manually search for a station or channel. • To store a station or channel: Press and hold one of the number buttons (1 to 6). • To select a stored station or channel: Press one of the number buttons (1 to 6) (or press one of the number buttons (1 to 6) on RC-406). Direct Access Tuning (using RC-406) 1 Press DIRECT to enter Direct Access Tuning. 2 Press the number buttons to enter a frequency or channel. 3 Press to search for a station or channel. • To cancel, press or DIRECT. • If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled. Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to make a selection (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. To return to the previous setting item, press . Default: XX TUNER SETTING IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from adjacent FM stations, but sound quality will not be degraded and the stereo effect will remain. AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels. • Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 4) RECEIVE MODE Sets the receive mode of the HD Radio receiver. AUTO: Automatically tunes to analog broadcast when there is no digital broadcast. ; DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes in to analog broadcast only. CLOCK TIME SYNC ON: Synchronizes the unit's time to the Radio Broadcast Data System station time. ; OFF: Cancels. ENGLISH 5